SINGER W1010 User Manual
Page 13
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Push bobbin to right and press
down foot controller.
Machine
stops
automatically
when winding is full.
Push bobbin to left.
Take
off
bobbin
from
spindle
and cut thread.
Retighten stop motion knob.
trouble
i
4
: ■ %
correction
If bobbin is wound unevenly
as shown, open face cover and
loosen set-screw of the guide for
bobbin winding, by using screw
driver and adjust height.
-10-
Advertising