Twin needle threading – SINGER W1010 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Twin Needle Threading
Thread
in
the
same
way
as
normal
threading,
except
at
points (D, ® and ©.
At point (D, pass threads sepa-
ratly to right and left of tension
disc.
At guide (D, pass one of threads
to right guide and the other at
left guide.
At point ©, thread from right
guide should be lead to right
needle eye, and from left guide
to left needle eye.
Leave ends of threads of about
1 5 cm (6”).
n.b.
When
using
zigzag
width
control, set it between 0 and 2.5.
To
set control
above 2.5
will
cause needle to break.
-14-
Advertising