Oiling – SINGER W1010 User Manual
Page 43
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Oiling
Use
oil
manufactured
specially
for
sewing
machine
use.
Other
oils
will
eventually
cause
mechanism to jam.
Apply one drop of oil to part of
hook where friction occurs.
Open face cover and apply oil in
the same way.
Be careful not to apply too much
oil or it may stain your material
and cause some sewing difficulty.
After oiling, run machine for 1-2
minutes to allow oil to penetrate
to every part.
Remove top cover by loosening
screws (a) and (b) with large
screwdriver.
kpply one drop of oil to lubricating points indicated by arrows.
-40-
Advertising