SINGER W12 - Manual (Page 25)

PRACTICAL SUGGESTIONS
Ш. 9 sho-ws folded bias tape sewn on the top of a hem for a finish. The foM^ tape is inserted in slot No. 1 and the edge of the hem
in slot No. S. Then turn hettH and sew other edge in povsition with the Presser-foot,
111. 10 shows a box plait piped. Insert the piping in slot No, 3, and the edge of the plate in slot No. 4 for the wdde piping effect. If a
narrow piping is desif^ insert thé piping in slot No;i 3 and edge Of plait in No. 1.
Til. И shows bias-folded material used té cover a seam. Thé folded strip is placed in slot No. 1 and the material underneath the At­
tachment. Care must be taken to keep, thè row of stitching as Close to the seam stitching as possible. The free edge of the bias strip is
then sewn in position with the Presser-foot.
111. 12 shows bias-folded material used to finish a curved edge. This finish Is practical for underclothes. Insert the bias-folded material
in slot No. 1 and the gariment in OlOt No. 5. Turn the bias strip back and add a second row of stitching with the Presser-foot,
lit. 13 shows a French seam stitched with thé Edge-slitching Attachment. After the seam is stitched with the Presser-foot and the
materia! turned on the wrong side ready for the fi nishing, it is inserted in síéí NO, 5 and adjusted to the proper distánée. .This is especially
practical for fine work where the seam shows through the garment.
Ш. 14 show's bias-.foldcd material sewn in position. To be used for boning or as a stay for children’s underwaists, or for brassieres. The
.folded tapé is inserted in slot No. 1 and the garment underneath the Attachment.
Ill, 15 shows bias-folded material used as a trimming. It is quite easy to turn corners using the Edge-Stitching Attachment. To turn
the outside curve stop the machine where the corner is to be turned and fold the proper amount ofmaterial over, then insert it in the At­
tachment and stitch until another corner Is reached. : It is not necessary to remove the material from the Attachment to turn the inside"
curve. Slot No. 1 is used for this kind of work and the garment is placed underneath the Attachment
;
.ю