Removing bobbin case and bobbin, Bobbin into bobbin case – SINGER W1888 User Manual
Page 11
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
REMOVING BOBBIN CASE AND BOBBIN
1
.
Raise needle to its highest
position
and
open
the
shuttle race cover.
bin case out of machine.
3. Release the latch and bob
bin will fall out easily.
inserting
BOBBIN INTO BOBBIN CASE
1.
Pull
off
5cm
of
thread
from bobbin and insert it
into bobbin case as shown.
Guide
the
end
of
thread
into slot.
Tension spring
3.
Pull
into
slot
and
under
tension
spring
and
draw
out
about
1 0
cm
of
thread.
_ 7 _
Advertising
This manual is related to the following products: