SINGER W1888 User Manual

Page 30

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

HEMMING

1. Raise the foot and the needle to its highest position. Replace the foot with the

hemmer foot.

2. Fold over the fabric edge by about 3mm and place it under the foot. Secure the

folded edge with a few stlttdies. Take out the workpiece and draw the hem

inttj the hemmer foot by pulling the threads.

3. Lower the foot and sew the hem.

4. During sewing, fold the fabric to the left a little and allow it to run into the

hemmer foot.

5. Make sure that the fabric does not move under the right half of the foot. The

faijric must be fed into the scroll of the hemmer sufficiently so that the work­

piece edge runs freely through the groove under the foot.

Only suitable materials can be used and some practice may be necessary to acheive

best results.

-26-

Advertising
This manual is related to the following products: