SINGER W1888 User Manual
Page 16
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ADJUSTING UPPER THREAD TENSION
Î
It is only normally necessary to adjust
the upper thread tension to achieve the
correct balance betiwen the upper and
tower threads.
The hi^er tfte number tw the dial the
0
-aater the tension.
Correct
Fabric
Incorrect
Upper thread
Bobbin thread
Inside of fabric
Upper thread
ADJUSTING
LOWER
THREAD
TENSION
Lovwr thread «nsion can be adjusted by
turning die screw on the bobbin case
slightly
to
the
right
(clock-wise)
to
increase tension, (Anti-clockwise) to die
left to decrease tension.
As a general guide only, die user can achieve the correct
tension for normal sewing, by carefully suspending the
wound bobbin in itt case by the thread. If the bobbin
and case immediately fall to the ground, die tension is too
loose and should be increased. The correct tension is
obtained whan a slight jerk of the thre^i causes the bobbin
to
drop a short distance only. If this action does not move
die bobbin die tension is too tight and should be loosened
until the desired effect is achieved.
-12-