Auto dry, Damp dry, Wrinkle release – Maytag D-2 User Manual

Page 7

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Note: The dial can be turned in either direction to select a cycle. Once started^ the dial

will not advance at a specific rate during the Auto Dry cycles. At first the dial may not
advance at all. Toward the end of the cycle (when the load begins to dry) the dial will
advance at a more regular rate and much more quickly. This is normal operation.

Auto Dry

REGULAR is designed for loads such

as towels, underwear, t-shirts, jeans, etc. Set the

control to the desired dryness level (more dry -
less dry). The triangle symbol, A, is the initial

preferred setting for the majority of loads.

Auto Dry
SY CARE /
iVNENT PRESS
7 Press Care

OFF

WRINKLE RELEASE

9

*» DAMP DRY

«

IME DRY

Auto Dry

more dry REGULAR

dry

OFF

; ®

é

e i

AIR FLUFF

o « ® ®

i « * ®

TIME DRY may be selected for any

load if the Auto Dry sensor system
is not desired. Set the control to the

desired number of minutes and
choose the appropriate drying tem­
perature for the load.

AIR

FLUFF

provides

tumbling

without heat for sensitive loads or
items

needing

freshening.

As

example: certain sweaters, shower
curtains, camping gear, pillows,
etc. Set the control to the desired
number of minutes.

DAMP DRY

is designed to “partial­

ly’' dry items. It provides approxi­
mately 20 minutes of heated tum­
bling and 5 minutes of cool down
tumbling without heat.

WRINKLE RELEASE

will release

wrinkles from items that are clean

and dry but slightly wrinkled,
such as from a crowded closet,

packed suitcase or from sitting in

the dryer too long after the end of
the cycle. It provides 10 minutes
of heated tumbling and 5 minutes'
of cool down tumbling without
heat.

Advertising