Cleaning and oiling the shuttle, Cleaning and oiling shuttle – SINGER W128 User Manual
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CLEANING AND OILING THE SHUTTLE
becomes clogged with loose threads and lint.
oi the machine. Cleaning and removal of the
lint will safeguard the performance. To remove
1. Turn the balance wheel until the needle
reaches its highest position. Tilt head
back on its hinges-
Remove bobbin case (A), Fig. 25.
Turn shuttle race cover clamps B down
ward and pull hinged shuttle race cover,
C, down and remove shuttle D.
shuttle race cover by removing all threads
Apply a drop of oil with finger tip to outer edge of shuttle.
Pui tbe bobbin cse into sbnttle race, fitting tongue
notch E of race cover.
............. ■ ■ ■ - ■ ■
r*C :r- H