SINGER W128 - Manual (Page 24)

>i^*- < •^^^^^:*'':^-^зУ^
24
Fig. 26
THE EDGESTITCHER
The edgesticher is used in mak­
ing lace insertions, edgings and pip­
ings. The slots serve as guides. To
sew lace edging to fabric, place the
material you want on top of slot, Fig.
27, and the other piece in slot 4. Fig.
28
.
To trim with a wide piping, place
the fabric in slot 4, and the fold of
ATTACHMENT FOOT
In order to attach the binder, edgestitcher and the
hemmers, it is necessry to remove the presser foot and
replace it with the attachment foot. Fig. 26.
Mount binder, edgestitcher or hemmers sliding the
attachment to the left as for as possible and tigten
screw.
The mounting slot enables you to sew as close to
or as far away from the edge as desired. Just move the
attachment to the correct position before tightening the
mounting screw.
Fig. 28 Fig. 27
the piping to the left in slot 3 , for a narrow piping, place the fabric, in slot 2 and the folded
edge of the piping to the right in slot 3.
Slot 5 may be used as a guide in stitcing a French Seam.