How to remove and insert needles, To remove needle(s), To insert needle(s) – SINGER 14ET754 User Manual

Page 13: To remove needle(s) •to insert needle(s)

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

10. HOW TO REMOVE AND INSERT

NEEDLES

To Remove Needle(s)

A

Caution ;

l\ Be sure to disconnect the machine from the

electric outlet before removing needle(s).

Turn the hand wheel toward you until the needle is

at its highest position.

Loosen, but do not remove the needle set screw

with the small screwdriver.

1 Left needle set screw

2 Right needle set screw

3 Left needle

4 Right needle

Remove the needle(s).

To Insert Needle(s)

Caution :

|\ Be sure to disconnect the machine from the

electric outlet before replacing needle(s).

A

• Hold the needle with the flat surface to the back.

• Insert the needle into the needle clamp as far as it

will go.

• Securely tighten the needle set screw.

Note: » This machine uses #2022 needles. Refer

to page 7 lor additional needle information.

*

Remove the cloth plate if you find it difficult

to remove and replace the needle.

Advertising