2) inside corner, Cuttingi line i – SINGER 14ET754 User Manual
Page 45
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
• Fold the fabric with the wrong sides together and
^
sew.
Press the pin tucks in the same direction.
• Raise needle and presser foot.
•
Pull the fabric to the rear of the machine just
enough to release the thread caught on the finger
of the throat plate.
Note: Presser foot has been removed to show
detail.
• Turn the fabric and lower the presser foot so that
the knife is positioned in line with the cut edge.
• Pull slack threads up, then start to sew.
(2) Inside Corner
Cut fabric at seam edge.
Cutting line"^
Turning Square Corners
(1) Outside Corner
• Cut out approximately 2 cm (51/64 inch) from the
corner, in line with the overedge seam edge.
12 cm
• Sew one stitch beyond point (A) and stop.
2 cm
/'I
Cuttingi
line I
V
Cut Slit
43