Machine maintenance – SINGER 14ET754 User Manual

Page 48

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

25. MACHINE MAINTENANCE

An overlook requires more maintenance than a

conventional machine mainly due to two reasons.

1 ) A lot of lint is produced due to the cutting action

of the knives.

2) An overlock runs at a very high speed and needs

to be oiled frequently to lubricate the internal

working parts.

Cleaning the Machine

A

Danger;
Before cleaning your machine, disconnect

power line plug from the wall receptacle.

• Clean the lint from the looper and knife area often

with a dry lint brush.

Note: Lint brush is an optional part.

Oiling the Machine

A

Danger:

Before lubricating your machine, disconnect

power line plug from the wall receptacle.

The oiling points shown in the diagram, should be

oiled periodically.

Note: Use sewing machine oil. Do not use any

other oil or damage could result.

46

Advertising