SINGER W219R User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
35
36
INSTALLING SEWING HEAD IN CABINET
1. Loosen both head hinge set screws until
head hinge hole is clear.
Tilt head hinge fingers up and back as far
as they will go.
Carefully slip head onto head hinges-
making sure fingers are inserted as far as
they can go into head hinge holes.
Allow the head to rest in its tiltedback
position.
Tighten both set screws securely with screw
driver.
6. Plug electrical leads into sockets located
inside cabinet. Cord atUched ‘'motor"
tag must be plugged into socket marked
"motor”. Untagged cord goes to "light"
socket.
2
.
3.
4.
5
.
Advertising