SINGER 185K User Manual
Page 12
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
10
STITCH LENGTH REGULATOR
f
\
I
-r
c
Numerals on the indicator plate represent
approximate number of stitches per inch.
The “red dot”
C
indicates the stitch setting.
To set stitch length —
• Turn thumb nut to the left.
• Move lever until “red dot”
C
is at desired
stitch setting.
• Turn thumb nut to the right until it rests
against indicator plate.
Once thumb nut is against indicator plate,
reverse stitching is accomplished by raising
lever to its highest position.
Advertising