SINGER 185K User Manual
Page 34
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
32
TO CLEAN THE MACHINE
CLEAN
BETWEEN
TENSION
DISCS
tr
II
When in regular use
the machine should
be cleaned periodically.
Remove face plate and clean the area inside.
Remove bobbin case as instructed on page
33
and clean the stitch forming mechanism.
After each cleaning, oil the machine as
instructed on
pages 35
to
37.
If the machine is to be stored
for an indeñ-
nite period, brush away all traces of lint and
fluff, then swab all exposed parts with a lint
free brush saturated with SINGER oil to
protect against rust damage.
The area in the head of the machine that
should be cleaned and covered with a pro
tective coat of oil is shown at the left.
Also clean the stitch-forming mechanism
and cover the exposed parts with a coat of oil.