SINGER 185K User Manual

Page 25

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

23

THE BINDER

A D J U S T I N G

S C R E W

B I N D E R

S C R O L L

O U T S I D E

S L O T O F

S C R O L L

C E N T E R

S L O T

The binder is used to apply commercial

binding as well as self-fabric bias to an un­

finished edge.

This colorful trim is attractive when applied

to children’s wear, aprons and fabric furnish­
ings. It is a practical finish for seam edges

that ravel and for making bound seams.

Inserting the Binding

Pre-folded commercial bias binding is in­

serted from the right into the outside slot of

the binder scroll.

• Cut the binding diagonally to form a long

point.

• Insert the pointed end

into the slot and
pull

through

the

scroll until the even­
ly folded edges are

under the needle.

Self-fabric bias binding should be cut

wide on the true bias.

• Insert the unfolded

binding directly in­

to the two folds at
the end of the scroll
and draw it back

under the needle.

As the binding passes

through the scroll the
raw edges are turned in.

Advertising
This manual is related to the following products: