SINGER W160 User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
02
/
01/2008
1. Release the stop motion knob.
2. Follow the thread path as illu
strated.
3. When the bobbin is full, the stop
motion knob must be tightened.
5 cm thread
Push the bobbin winder spindle in
the direction of the arrow. When
the bobbin winding is completed,
move the bobbin winder spindle
back to its original position.
Should the bobbin winding berame
uneven loosen the screw on the up
per thread guide and adjust up or
down until the bobbin winding is
balanced.
Advertising
This manual is related to the following products: