Blind stitch hemming, Blind stitch hemming —24 – SINGER W160 User Manual
Page 26
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
02
/
01/2008
Blind stitch hemming
Fold the fabric as illustrated with the wrong side up SI j.
Place the folded fabric under the presser foot as shown.
Turn the handwheel towards you until the needle is in the far left position. Make
sure that the needle only catches one thread of the folded edge (2). If not,re-position
the fabric.
When the fabric is in the correct position, make sure that the edge guide on the
presser foot (3) follows the folded edge (2) through turning the roller (4).
Continue to sew and guide the fabric carefully to ensure that it remains in the correct
position against the edge guide S3).
Note! Some practice is needed in order to get the best possible result. Test sew on a
scrap piece of your fabric and check the right side.