SINGER W160 - Manual (Page 11)

02 / 01/2008
R e m o v i n g t h e b o b b i n c a s e a n d b o b b i n
1. Raise the needle to its
highest position. Open
the shuttle cover.
2. Open the latch on the
bobbin case and pull
the bobbin case out of
the machine.
3. Release the lat'h and
the bobbin will fall out.
I n s e r t i n g t h e b o b b i n
1. Pull out abt.Bcm thread
from the bobbin and
insert the bobbin into
the bobbin case as illu­
strated.
2, Guide the thread th­
rough the slot.
Thread tension spring
3. Pull the thread through
the slot and under the
tension spring and draw
out about 10 cm thread