Step select water level (features, Step © select water temperature, Step select extra rinse lit desired – Maytag LAT8416 User Manual
Page 5: Stepq, Start washer, Step select water level, Step, Select water temperature, Step select extra rinse
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Step Select Water Level
Turn the WATER LEVEL knob
to the setting that matches the
size of the load.
Select models offer infinite set
tings. Choose a specific setting or
any point in between.
If more water is needed once the
fill is complete, turn the knob to
reset and then to the proper set
may vary according to model.)
WATER LEVEL SETTING
Select Water Temperature
Turn the WASH/RINSE knob to
the desired water temperatures.
Follow the garment care label for
best results. Use the chart at right
as a guide.
REMEMBER: In wash
water temperatures below 65”
F, detergents do not dissolve
well or clean well. Care
labels define cold water as up
WASH / RINSE TEMP
3/4 - Full
1/2 - 3/4 Full
1/3 - 1/2 Full
Small (select models)
REMEMBER: Items must circulate
freely for best results.
White and heavily
colored items; most
lightly soiled items;
Step Select Extra Rinse
Provides additional rinse at the end
of the cycle to more completely
remove laundry additives, suds,
Add load and close lid.
Pull out control knob to start.
NOTE: The wash/spin speeds are automatically programmed to
assure proper agitation and spinning for each load type. REGU
LAR cycles will provide a fast wash/spin speed, EASY CARE/PER-
MANENT PRESS will have a fast wash/spin speed along with a
cool-down spray rinse. DELICATES cycle will have a gentle wash
and slow final spin speed.