Adjustment of presser foot pressure, How to replace needle, To remove the needle – SINGER 14U22 User Manual
Page 15: To replace the needle
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
8. Adjustment of presser foot pressure
The presser foot pressure of this machine is
preadjusted at the factory to suit the sewing of
medium weight fabrics.
It may become necessary to adjust the pressure
in the case of delicate or heavy weight fabric.
For light weight fabric — Decrease the pressure
(as shown at left).
Heavy weight fabric — Increase the pressure
(as shown at left).
9.
How to replace needle
Needle eye
Insert the needle with the long
groove to the front.
Use Singer needle Cat. No. 2053. Available in
sizes #10, #11, #14.
Needles for household machines can not be used.
To remove the needle:
• Be sure the power line plug is disconnected
from the wall receptacle.
• Turn the machine pulley toward you until
the' needle is at its highest position. Loosen
the needle set screw with a screw driver and
remove needle.
To replace the needle:
• Insert the needle into needle bar as far as it
will go, with long groove toward you, as
shown in figure at left.
• Hold needle firmly so that its direction can
not change and securely tighten the needle set
screw.
13