SINGER 14U22 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
(6) Replace the cylinder cover. (See page 5)
(7) Loosen the chaining-off fìnger set screw on the presser foot and adjust the fìnger to the cutting width
desired by moving it either to the right or left and tighten set screw.
(8) Return the movable knife to its original position.
Chaining-off
finger
Chaining-off
finger set
screw
Presser
foot
(9) Test sew
Make a test sample first so that you can correctly adjust the position of the chaining-off finger, since an
improperly positioned finger may cause the cutting width to become narrower than the overedge seam
width, or become wider and cause the edge of the fabric to fold.
It may be necessary to re-adjust position of chaining-off fìnger when other materials are used.
15