SINGER W1210 User Manual
Page 17
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Twin Needle Threading
Thread in the same way as
normal
threading,
except
at
points (2), © and ®.
At point (2), pass threads sepa-
ratly to right and left of tension
disc.
-14-
At guide ®, pass one of threads
to right guide and the other at
left guide.
At point ®, thread from right
guide should be lead to right
needle eye, and from left guide
to left needle eye.
Leave ends of threads of about
1 5 cm (6").
n.b. When using zigzag width
control, set it between 0 and 2.5.
To set control above 2.5 will
cause needle to break.
Advertising