Cloth guide, Adjusting thread tension – SINGER W1210 User Manual

Page 22

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Cloth Guide

Use cloth guide when sewing a
long seam of regular distance

from edge of material.

Set guide in hole on arm, at right
of needle plate, and adjust
distance.

Run machine with edge of fabric
touching guide.

Position cloth guide at an angle

to sew a curved seam.

Sew reverse stitches for rein­
forcement at end of seam.

Draw fabric to left when sewing
is finished.

Cut threads with thread cutter
behind presser bar.

Adjusting Thread Tension

Test stitch performance on a
scrap of material you are going

to use.

With correct tension (fa;), upper

and lower threads tension is
equal and strong enough to lock

both threads in center.

If upper tension is too tight
(loose), upper (lower) thread lies
straight along upper (lower)
surface of fabric (©.(£)). Correct

by turning tension dial.

Advertising
This manual is related to the following products: