Chapter 2. getting ready to sew, Chapter 2, Getting ready to sew – SINGER 4314 User Manual

Page 6: Choosing and changing accessories

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Chapter 2. Getting Ready to Sew

choosing and changing accessories

CHANGING THE NEEDLE

Raise

needle

to

its

highest

point by turning

the

hand

wheel

toward you.

Loosen

needle

clamp screw

A

and remove the needle.

Insert

new

needle

up

into

clamp

B

as

far

as it will go, with the flat side of the needle

to the back.

• Tighten needle clamp screw.

Flat Side to Back

CHANGING PRESSER FEET

Snap-on Presser Feet

The

presser

feet

furnished

with

your

machine

Raise

needle

to

highest

position

by

turning

the

snap on and off a common shank.

hand wheel

toward you.

Raise presser foot.

To Remove and Replace Foot

la. Press toe of presser foot upward as far as 1b. Then snap down to remove,

it will go.

2. Centre the new presser foot under the shank 3. Press presser foot screw down

firmly

until

C

and

lower the presser foot lifter

so that foot snaps into place,

the shank fits over the

presser

foot pin.

Advertising