Optional accessories, Attaching elastic tape using elastic foot – SINGER WSL216 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
5. OPTIONAL ACCESSORIES
Optional Accessories described in this section
are not supplied with this Machine as
standard equipments, but can be obtained
from the Dealer who supplied your Machine
or by contacting us direct.
ATTACHING ELASTIC TAPE
USING ELASTIC FOOT
1. Replace regular foot with elastic foot.
2. Set stitch length to about 4.
3. Slightly raise the roller portion of the foot
and insert elastic tape between the roller
and the lower support bar as illustrated,
until the edge of elastic reaches the feed
dog teeth. (It may be necessary to loosen
the Tension Control Screw on the Roller
to feed the Elastic through).
4. Sew the elastic tape for about one inch or
so to confirm the tape is being properly
sewn.
5.
Place the fabric under the foot and sew
together with the elastic tape.
6.
Check that the Stitch formation is
uniformally balanced and if necessary
adjust the Thread Tension Controls.
7. Adjust the Tension Control Screw of the
Roller so that the desired finish can be
obtained.
a. Tighter tension of the Roller gives more
elasticity of the fabric after it is sewn.
b. Looser tension of the roller gives less
elasticity of the fabric.
32