SINGER WSL216 - Manual (Page 7)

HREADING LOWER LOOPER
Pass the thread
through lower
looper eye, and
hook it around
part A as indh
cated by an arrow
on illustration.
Leave about 10
cm. extra thread
from looper eye.
w
/7
Feed the thread through the
thread guide as illustrated.
I -♦?
/
While pressing down and hold^
ing tension release lever with
your right thumb, pull the
lower thread passing through
right-hand tension slot with
your left-hand.
THREADING NEEDLE
.‘•I
7v-lni
-■V .It*- I
Feed the ,
thread ouidé;iis“Ìlltistratecirn r^;.
While pressing down and hold­
ing tension relaase/léver^t its
dowp position, draWtha lieodle
thread passing ;
hand tenslori sldji' to ta^sure
positive engagement of the..it
thread with tension fdiscs 1
inside.
Raise the needle to its
highest position. Thread
the needle from front to
back through needle eye,
pull the thread backwardly
together
with looper
threads passing along the
right side of presser foot,
and turn around towards
left under the rear edge of
the foot, leaving an extra
length of about 10 cm.^
Dravy the thread over
thread guide as illustrated.
ÜSiSi?
the