Ajuste de puntos para telas extensibles, Adjusting stitches for stretch fabrics, Guiding and supporting fabric – SINGER 1862 User Manual

Page 54: Guía y soporte de las telas

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Adjusting stitches

for stretch fabrics

Guiding and
supporting fabric

Most fabrics of Stretch or knit construction
need only to be guided in front of the
presser foot when you use one of the stretch

stitches. Some fabrics—nylon tricot and
elasticized fabrics, for example—do require
support while being stitched.

1. For nylon tricot and similar synthetic

knits, apply gentle tension by holding the

seam in front and back of the presser foot
as you sew.

2. For elasticized fabric, stretch lace, and

knits with an unusual amount of elasticity,
apply firm tension in front and back of the
presser foot to stretch the seam as the
stitches are being placed.

CAUTION: Do not pull the fabric while

you are stitching as this may deflect the

needle, causing it to break.

Ajuste de puntos para
telas extensibles

Guía y soporte de las telas

La gran mayoría de las telas de construcción

elástica o de punto solo necesitan guiarse
frente al prénsatelas cuando se usa uno de
los puntos elásticos. Algunas telas — tricot
de nilón y telas elastificadas, por ejemplo —
requieren soporte cuando se les cose.

1. Para el tricot de nilón y telas de punto

sintéticas similares, aplique una ligera

tensión sujetando la costura en el frente y

la parte posterior del prénsatelas
mientras cose.

2. Para telas elastificadas, encaje elástico y

telas de punto que tienen una cantidad

i nhabitual de elasticidad, aplique una

firme tensión en el frente y la parte
posterior del prénsatelas para estirar la
costura mientras se colocan los puntos.

CUIDADO: No tire de la telas mientras
esta cosiendo ya que esto puede desviar
la aguja, haciendo que se rompa.

52

Advertising
This manual is related to the following products: