SINGER W1640 User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Section 4
essories, there is a feed cover, to sew mebroidery, darning, mond-
on buttons which need no feeding to fabrics, use this 'TEED
iiiig O'"
tfl"
f.ed cover on needle plate
.
edie to its highest position.
j|fise oe
studs and one back stud into holes on needle plate, as shown in
¡¡Ijck two
fig.
26
.
sure normal sewings, should always take this feed cover, that is, without
i
i ' i l O n
j .
Uu
J O D U
i l
JSTING PRESSURE FOR REGULAR SEWING
)ressure of the presser foot must be regulated for different types of fabric to
1
proper feeding. To adjust pressure push down outer ring (A; Fig. 27)
itch-O-Matic Darner with thumb and forefinger. The center button (B,
27) will spring up and then the pressure can be easily adjusted by being
d down partially for light fabrics (Fig. 28), or all the way down for medium
ivy fabrics (Fig. 29).
STING PRESSURE FOR EMBROIDERY, DARNING AND SEWING ON BUTTONS
the outer ring (A, Fig. 27) down with thumb and index finger and the
button (B, Fig. 27) will pop up. The pressure will be completely released.
-17-