Threading the needle, Raising the bobbin thread – SINGER 3102 User Manual
Page 6
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
THREADING THE NEEDLE
1. Raise take-yp lever to highest point,
2, Place spool of thread on ^ooi pin over
the felt.
3, Lead thread through threading points
shown,
hread needle from front to back.
3. Draw about four inches of thread through
eye of needle.
RAISING THE BOBBIN THREAD
1. Hold needle thread lightly with left hand
and turn hand wheel slowly towards you
so that needle enters needle plate.
2. Continue turning hand wheel and holding
needle thread until needle rises and
brings up bobbin thread in a loop.
3. Uido the loop with your ingers.
4. Place both needle and bobbin threads
under the presser foot and draw them to
back of machine.
4