Zig-zag stitchiisig – SINGER 3102 User Manual
Page 9
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
ZIG-ZAG STITCHIISIG
Stitch Width Selector
As the selector is moved to the right, the width
of the zig-zag stitch is increased. Four set
tings are indicated, but intermediate settings
may also be used.
Needle Position Selector
Needle position setting of i» places stitching
in center needle position.
Settings «»• and «> place stitching in left or
right needle position at stitch widths less than
maximum.
Center position is preferred. Left or right
settings are used only for special stitch
placement, as when making buttonholes.
Setting Tension for Zig-Zag Stitchirsg
Make a test sample with the fabric and thread
you plan to use so that you can adjust the ten
sion properly. The stitches should lie flat
against the fabric without causing the fabric
to pucker. If the stitches are not flat and the
fabric is Quokere6, lower the r^eedie-thread
tension by turning the dial to a lower number.