Shaping darts in interfacings, Sewing on, Sheer materials – SINGER W311 User Manual

Page 45: Sewing on sheer materials

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

44

SHAPING DARTS IN INTERFACINGS

Center

Fig. 95

Cut interfacing clown center between dart lines. Over­

lap cut edges, matching dart lines. Zigzag stitch along

marking line

f r o m

point to wide end of

d a r t. T r im

both

raw edges close to stitching.

g. 96

Fig. 97

SEWING ON
SHEER MATERIALS

Most fabrics need to be guided only in front of the presser foot as shown at left. Many flimsy

sheers, crepes, knits, tricots, etc., require support while being stitched. For such fabric use the

straight stitch throat plate and presser foot and apply gentle tension by holding seam in front and

back of the presser foot as shown at right.

Advertising