Hemming and inserting lace in one operation, Cloth guide – SINGER W311 User Manual
Page 23
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
HEMMING AND INSERTING LACE IN ONE OPERATION
The Narrow Hemmer is designed with a slot at the right,
into which lace, braid, or any other finished trimming edge can
be inserted, and stitched to the garment while hem is being
made.
1.
Proceed to make a hem in the manner described.
2.
Insert edge of lace or trimming right side down in slot of
Hemmer.
3.
Commence to sew, guiding edge of the lace into the slot
of the Hemmer with the right hand, and guiding the ma
terial into the Hemmer with the left hand.
32. CLOTH GUIDE
This attachment is most convenient for guiding the cloth so
as to keep the stitching parallel to the edge of the material.
1.
,A.ttach Cloth Guide to the machine bed, with the screw
supplied, into one of the two sciew holes in the bed, as
shown.
2.
Adjust the Guide to the required distance between the
needle and the Guide, and tighten screw firmly.
3.
The Cloth Guide can be adjusted to bring the line of stit
ching as close to the edge of the material as desired, or
as far away as the maximum adjustment permits, which is
about l-’i;''.
22