Removing the bobbin case – SINGER W311 User Manual
Page 7
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Our new type hinge plate suitersedes the slide ¡tlate.
To open, place finger in recess and lift.
OPENING OR CLOSING THE HINGE PLATE
REMOVING THE BOBBIN CASE
Turn the balance wheel toward you until the needle ha
at its highest position.
Lift the hinged ¡Mate and insert thumb and forefinger of
hand.
Open the latch of the bobbin case as shown and take out
bobbin case by holding the latch.
Inportant The shuttle hook and bobbin case can be kno<
out of position if you use a bent needle, or try to take
the bobbin case when the needle bar is lowered.
Advertising
This manual is related to the following products: