SINGER W1777 - Manual (Page 29)

7. SEWING ON BUTTONS
Set machine as shown.
Position a button and material un­
der foot. When needle comes to left
side of stitch, lower foot. Raise
needle and adjust zigzag width so
that needle comes to right hole of
button.
Make one stitch be certain that nee­
dle is aligned with button’s holes.
Run machine at medium speed and
sew 5-6 zigzag stitches.
Stop machine when needle is in
upper position.
@ Set zigzag width control to 0,
align needle with button’s hole and'
sew 3-4 stitches to prevent stitches
from unlocking.
OR
® Remove work and cut off
threads.
Draw thread ends through to wrong
side and tie a knot.