Changing needle – SINGER W1777 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Changing Needle
Set
needle
in
the
highest
position
by
turning
handwheel
towards you.
Loosen needle clamp screw and
remove needle.
With flat face away from you,
insert a new needle into groove
of needle bar.
Push
needle
until
it
reaches
stopper (a) and tighten needle
clamp screw firmly.
Proper needle
straight shaft
v_
sharp point
azT
Always use a straight needle with
a sharp point.
Using defective or worn needles
not only causes stitch skipping,
breakage of needles or snapping
of thread; it also can damage
hook and needle plate.
Advertising