SINGER W1777 User Manual
Page 50
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
J
Oiling
.
Use oil manufactured specially
for sewing machine use. Other
oils
will
eventually
cause
mechanism to jam.
Apply one drop of oil to part of
shuttle where friction occurs.
Open face cover and apply oil in
the same way.
Be careful not to apply too much
oil or it may stain your material
and cause some sewing difficulty.
After oiling, run machine for 1-2
minutes to allow oil to penetrate
to every part.
Remove Top Cover:
Pull out spool pins and push
bobbin winding spindle to right.
Loosening screws @ and ® with
large screwdriver, then take off
top cover.
\pply one drop of oil to lubricating points indicated by
^----------—-------------- ------------ ----------------------------------------- --------
arrows.
J
-46-