Add a design from an embroidery card – SINGER XL1000-WORKBOOK Quantum User Manual

Page 46

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

The XL-1000 has the capability to rotate

a design in either 90 or 5-degree increments.

It also can rotate to the right or to the left.

Special note:

If you try to rotate a design that is close to the frame or too big,

the machine might not accept a 90-degree rotation.

It would force the design to be sewn outside the hoop.

Since sewing outside the hoop is impossible,

the machine rejects the 90-degree rotation and automatically will

try the acceptable degree that will fit in the hoop sewing area.

□ Press "POSIT END"

□ Press "POSmON/ROTATE"

□ Use "ARROW KEY" - to move the border as far left as possible

□ Press "POSIT END"

□ Press "EDIT END"

Add a design from an embroidery card.

When inserting or removing an embroidery card the machine

does NOT need to be turned off

Q Press "COMBI"

□ Insert embroidery card

□ Press EMBROIDERY CARD icon

Use "PAGE-TURNING" keys to proceed through designs

□ Select the embroidery design of your choice

□ Press "ENTER"

□ Press "EDIT"

-43-

Advertising