Special note – SINGER XL1000-WORKBOOK Quantum User Manual
Page 62
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Special note:
There is a ”NO SEWING” area around
the edge of the hoop, marked by the triangles.
Make sure neither "X" nor "Y" lines fall In that area.
When securing material in
embroidery frame, take
care to install it so that
vertical and lateral
marker lines on material
align inside triangle marks
on frame, (see page 95 for
preoaration of material and
marking of lines)
After securing material in
frame, press | a» | key.
Attach embroidery frame
on embroidery frame holder
The machine needs to know where the fabric is in the hoop and
that is what the lines are used for
Touch the screen on the lower left portion on or near the X line -
a dot will appear on the screen where you touched it and the hoop
will move placing the needle close to the X line.
Turn handwheel to check that needle entry point is on the X line
Use ARROW KEYS to adjust so needle entry is ON the line and
check it is properly placed turning the handwheel to lower needle
When the needle is on the X line
Press "X-LINE" MEMO POSITION 1
The first of two points the machine needs in order to record X line
Touch the screen on the lower right hand side of the X line and
align the second needle position as above using ARROW KEYS
and checking needle entry is ON the X line turning the handwheel
-
59
-