Memories, Standard machine memory, Working memory for standard machine – SINGER XL1000-WORKBOOK Quantum User Manual
Page 66: Permanent memory for standard machine
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Memories
P
art
IX
1. Standard machine memory
There are two types of memory used when the machine is in the
standard sewing mode;
1. WORKING MEMORY
and
2. PERMANENT MEMORY
1. WORKING MEMORY for standard machine
When an element (such as a fun face, scallop stitch or letter) is
chosen, it immediately goes into "WORKING MEMORY". The
working memory is also called the layout memory, because this is
where the operator is joining together or laying out the order of
the chosen elements.
To clear this memory, press the "CLR MEM" key. Each time the
key is pushed the last entered element will be erased. To clear all
the elements chosen, hold the "CLR MEM" key for 3 seconds.
Turning the machine off will
erase the standard machine working memory.
2. PERMANENT MEMORY for standard machine
The permanent memory has 15 file folders.
They each hold up to 40 elements.
To store in permanent memory press "IN"-file folder on the bottom
bar.
The PERMANENT MEMORY will hold for 99 years
or until removed from the file-folders
by pushing the TRASH CAN" icon.
-63-