Needle setting and changing – SINGER WREX 101 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
NEEDLE SETTING AND CHANGING
THE MACHINE SHOULD
BE
CHECKED TO INSURE CORRECT
NEEDLE SETTING TO PREVENT DAMAGE TO NEEDLES.
Depress knee lifter (R^152).
2
Turn hand wheel CLOCKWISE until eye of needle is at slot
in presser foot shoe (R-49A).
3
Slowly release knee lifter . . . the rib (R-612) should JUST
' TOUCH THE NEEDLE.
4.
If rib IS pressing up against needle iFig. 1), turn dial
(R^57N) toward "LESS" until rib just touches needle.
If rib is away from needle (Fig. 2), turn dial toward
"MORE" until rib just touches needle.
47...
v'i.
Fig. 1
Fig. 2
Advertising