Changing needle – SINGER W1505 User Manual

Page 11

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

Changing Needle

Set

needle

in

the

highest

position by turning handwheel

towards you.

Loosen needle clamp screw and

take out needle.

With flat side away from you,
insert a new needle into groove
of needle bar.

Push needle into clamp until it
reaches stopper @ and tighten
needle clamp screw firmly.

Always use a straight needle with
a sharp point.

Using defective or worn needles
not only causes stitch skipping,
breakage of needles or snapping

of thread; it also can damage
hook and needle plate.

-8-

Advertising
This manual is related to the following products: