Changing light bulb – SINGER W1505 User Manual
Page 46
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
PROBLEM
PROBABLE CAUSE
CORRECTION
The material
Upper or lower thread tension too tight
P.13, P.20
puckers
Stitch too long for material
P.18
Thread too thick
P.16
Incorrect threading of upper or lower thread
P.14, P.12
Breaking needle
Needle not correctly inserted
P. 8
Needle bent
P. 8
Needle clamp screw too loose
P. 8
Upper thread tension too tight
P.20
Needle too fine for the material
P.16
Dials have been changed while
the needle was down in the material
P.18
If trouble is still apparent in the machine, please consult your nearest dealer.
Do not try to correct fault by yourself.
Changing Light Bulb
Unplug the machine.
Open face cover as shown.
Remove bulb by unscrewing it
in counterclockwise.
Install a new bulb by screwing it
in clockwise.
* In case face cover is fixed by a
screw, open face cover after
loosening a screw by screw
driver.
-43-