Drawing up lower thread, Foot pressure – SINGER W1505 User Manual
Page 18
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Drawing Up Lower Thread
Hold end of upper thread with
left hand.
Turn handwheel slowly towards
you until needle moves down and
up again.
Pull upper thread slowly and
lower thread will be brought up
in a loop.
Pull out both threads to about 15
cm (6") and place them together
under presser foot on left.
Foot Pressure
Push down the outer ring of the pressure
regulator. This will release the pressure on
the presser foot. To increase the pressure,
push down inner pin until suitable pressure
is obtained.
Insufficient pressure may cause poor
feeding of the fabric, skipped stitches, or
difficulty in guiding the fabric. If feed dogs
or presser foot marks appear on the fabric,
reduce the pressure.
When sewing multiple thickness or heavy
fabric,
reduce
the
pressure.
Increase
pressure
when
sewing
lighter
weight
fabrics.