Husqvarna 1030 BioClip - Manual (Page 16)

L/mi V ii^vsi
3. Select the required cutting height (1-7) with the
cutting height lever.
4. Push in the lock button on the lift lever and lower
down the cutting unit.
Cutting tips
WARNING!
Clear the lawn from stones and other
objects which can be thrown out by
the blades.
Localise and mark stones and other fixed
objects to avoid collision.
Start with a high cutting height and reduce down
until the required mowing results are obtained.
The mowing results are best with a high engine
speed (fast rotating blades) and low driving
speed (slow moving machine). If the grass is not
too high and thick the driving speed can be
increased or the engine speed reduced without
noticeably affecting the mowing results.
The best lawns are achieved if the grass is cut
often. Mowing becomes more uniform and the
grass cuttings become more evenly distributed
over the surface.
The total time consumption is not greater since it
is possible to select a higher driving speed
without inferior mowing results.
Avoid mowing a wet lawn. The mowing results
are inferior since the wheels sink down into the
soft lawn.
Hose down the cutting unit with water under­
neath each time it is used.
J
1
J
Mowing pattern
-15