Check the transmission’s air intake, Check the transmission’s oii ievei – Husqvarna 1030 BioClip User Manual
Page 21
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Check the transmission’s air intake
Check that the transmission’s air intake in not
blocked.
Check the transmission’s oii ievei
1. Check the transmission’s oil level by looking
through the mesh on the air intake. The oil level
should lie between the MIN and MAX markings
on the oil canister at 20° C.
If oil needs to be added the transmission cover
must be dismantled first. Release the two
screws (one on each side) and then lift off the
transmission cover.
2. Screw off the oil canister cap and top up with
engine oil SAE 10W/30, class CD-CF, until the
oil level reaches the MAX marking. Screw the
oil canister cap back on, and fit the transmission
cover.
20
- English