Dismantling of the machine hoods – Husqvarna 1030 BioClip User Manual
Page 19
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Dismantling of the machine hoods
Engine hood
Release the two rubber straps on the rear edge of
the engine hood and lift off the hood.
Front hood
Dismantle the screws (1,2 and 3) and lift off the
front hood.
Right-hand fender
Dismantle the foot-plate (1), screws (2 and 3), and
lift off the fender.
Left-hand fender
Dismantle the screws (1 and 2), and lift off the
fender.
18
- English
Advertising
This manual is related to the following products: