A i\i ii, 1= i – Husqvarna 1030 BioClip User Manual
Page 5
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
These symbols are on the machine and in the instructions.
Study them carefully so that you know what they mean.
Read the instructions.
R N
Reverse
Neutral
© a i\i II
Fast
Slow
Engine off
Battery
Oil pressure Cutting height
Backwards
Use hearing protection
Clutch in
Forwards
Choke
Fuel
stop
!
start
Ignition
1= I?
Hydrostatic freewheel
(©) o A
Clutch out
Parking brake
Brake
Warning
Sound level Warning! Rotating blades Warning! Risk that the machine can tip over Never drive across a slope
European standard for
machine safety
O
O
Never use the machine if persons,
especially children, or animals,
are in the vicinity
Never carry passengers on the Keep hands and feet away
machine or equipment
from under the hood when
the engine is running
Drive very slowly
without the cutting unit
Starting instructions
Read the instructions
Check the engine’s oil level
Check the hydrostat’s oil level
Lift up the cutting unit
Put the gear shift/hydrostat pedal in
neutral
Brake
If the engine is cold use the choke
Start the engine
Release the parking brake before
driving
1“7
Speed limiter pedal forwards
Neutral
Speed limiter pedal reverse
Switch off the engine and take off
the ignition cable before repairs or
maintenance
4
- English