Automatic redial, To dial using last number redial – Xerox 7024 User Manual
Page 63
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
DIALUNG
Automatic redial
Redialling occurs automatically if the remote terminal is busy.
The terminal will hang up, wait for the specified dialling interval
and the display will flash the following:
DELAY START PENDING
If, after the specified number of redial attempts the terminal fails
to connect, the terminal will return to the idle mode.
Refer to SET NUMBER OF REDIALS to select how many times the
terminal will redial a busy number and REDIAL INTERVAL to
select the amount of time between each attempt.
This redial feature is not available for transmissions if the remote
terminal is dialled manually using voice request or telephone
handset.
To dial using last number redial
1. Press [Redial] on the control panel to redial the last
automatically dialled number.
2. Press [Start] to begin the operation.
TELECOPIER 7024 USER HANDBOOK
2-21